View TSL262R_8085488.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

taos inc. is now ams ag the technical content of this taos datasheet is still valid. contact information: headquarters: ams ag tobelbaderstrasse 30 8141 unterpremstaetten, austria tel: +43 (0) 3136 500 0 e - mail: ams_sales @ams.com please visit our website at www.ams.com
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 1 the lumenology company copyright 2007, taos inc. www.taosinc.com integral visible light cutoff filter monolithic silicon ic containing photodiode, operational amplifier, and feedback components converts light intensity to a voltage high irradiance responsivity, typically 111 mv/( w/cm 2 ) at p = 940 nm (tsl260r) compact 3-lead plastic package single voltage supply operation low dark (offset) voltage....10mv max low supply current......1.1 ma typical wide supply-voltage range.... 2.7 v to 5.5 v replacements for tsl260, tsl261, and tsl262 rohs compliant (? lf package only) description the tsl260r, tsl261r, and TSL262R are infrared light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier (feedback resistor = 16 m , 8 m , and 2.8 m respectively) on a single monolithic ic. output voltage is directly proportional to the light intensity (irradiance) on the photodiode. these devices have improved amplifier offset-voltage stability and low power consumption and are supplied in a 3-lead plastic sidelooker package with an integral visible light cutoff filter and lens. when supplied in the lead (pb) free package, the device is rohs compliant. functional block diagram voltage output + ? available options device t a package ? leads package designator ordering number tsl260r 0 c to 70 c 3-lead sidelooker s tsl260r tsl260r 0 c to 70 c 3-lead sidelooker ? lead (pb) free s tsl260r ? lf tsl260r 0 c to 70 c 3-lead surface-mount sidelooker ? lead (pb) free sm tsl260rsm ? lf tsl261r 0 c to 70 c 3-lead sidelooker s tsl261r tsl261r 0 c to 70 c 3-lead sidelooker ? lead (pb) free s tsl261r ? lf tsl261r 0 c to 70 c 3-lead surface-mount sidelooker ? lead (pb) free sm tsl261rsm ? lf TSL262R 0 c to 70 c 3-lead sidelooker s TSL262R TSL262R 0 c to 70 c 3-lead sidelooker ? lead (pb) free s TSL262R ? lf TSL262R 0 c to 70 c 3-lead surface-mount sidelooker ? lead (pb) free sm TSL262Rsm ? lf texas advanced optoelectronic solutions inc. 1001 klein road suite 300 plano, tx 75074 (972) 673-0759 package s sidelooker (front view) 1 gnd 2 v dd 3 out package sm surface mount sidelooker (front view) 1 gnd 2 v dd 3 out ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 2 copyright 2007, taos inc. the lumenology company www.taosinc.com terminal functions terminal description name no. description gnd 1 ground (substrate). all voltages are referenced to gnd. out 3 output voltage v dd 2 supply voltage absolute maximum ratings over operating free-air temperature range (unless otherwise noted) ? supply voltage, v dd (see note 1) 6 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . output current, i o 10 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . duration of short-circuit current at (or below) 25 c (see note 2) 5 s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . operating free-air temperature range, t a ? 25 c to 85 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . storage temperature range, t stg ? 25 c to 85 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lead temperature 1,6 mm (1/16 inch) from case for 10 seconds (s package) 260 c . . . . . . . . . . . . . . . . . . . . reflow solder, in accordance with j-std-020c or j-std-020d (sm package) 260 c . . . . . . . . . . . . . . . . . . . ? stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress ratings only, a nd functional operation of the device at these or any other conditions beyond those indicated under ?recommended operating conditions? is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. notes: 1. all voltages are with respect to gnd. 2. output may be shorted to supply. recommended operating conditions min nom max unit supply voltage, v dd 2.7 5.5 v operating free-air temperature, t a 0 70 c ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 3 the lumenology company copyright 2007, taos inc. www.taosinc.com electrical characteristics at v dd = 5 v, t a = 25 c, p = 940 nm, r l = 10 k (unless otherwise noted) (see notes 3, 4, and 5) parameter test tsl260r tsl261r TSL262R unit parameter test conditions min typ max min typ max min typ max unit v d dark voltage e e = 0 0 4 10 0 4 10 0 4 10 mv v om maximum output voltage v dd = 4.5 v 3 3.3 3 3.3 3 3.3 v e e = 18 w/cm 2 1 2 3 v o output voltage e e = 46 w/cm 2 1 2 3 v v o output voltage e e = 220 w/cm 2 1 2 3 v e e = 18 w/cm 2 , 8 mv/ c temperature e e = 18 w/cm , t a = 0 c to 70 c 0.4 %/ c t emperature coefficient of e e = 46 w/cm 2 , 8 mv/ c vo coefficient of output voltage (v ) e e = 46 w/cm , t a = 0 c to 70 c 0.4 %/ c pg (v o ) e e = 220 w/cm 2 , 8 mv/ c e e = 220 w/cm , t a = 0 c to 70 c 0.4 %/ c n e irradiance responsivity see note 6 111 43.5 9.1 mv/( w/cm 2 ) e e = 18 w/cm 2 1.1 1.7 i dd supply current e e = 46 w/cm 2 1.1 1.7 ma dd pp y e e = 220 w/cm 2 1.1 1.7 notes: 3. measurements are made with r l = 10 k between output and ground. 4. optical measurements are made using small-angle incident radiation from an led optical source. 5. the input irradiance e e is supplied by a gaas led with peak wavelength p = 940 nm 6. irradiance responsivity is characterized over the range v o = 0.05 to 2.9 v. the best-fit straight line of output voltage v o versus irradiance e e over this range will typically have a positive extrapolated v o value for e e = 0. dynamic characteristics at t a = 25 c (see figure 1) parameter test conditions tsl260r tsl261r TSL262R unit parameter test conditions min typ max min typ max min typ max unit t r output pulse rise time v dd = 5 v, p = 940 nm 260 70 7 s t f output pulse fall time v dd = 5 v, p = 940 nm 260 70 7 s v n output noise voltage v dd = 5 v, f = 1000 hz e e = 0, 0.8 0.7 0.6 v/ hz ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 4 copyright 2007, taos inc. the lumenology company www.taosinc.com parameter measurement information voltage waveform test circuit input e e 10% 90% output (see note b) t r tsl26xr r l v dd 2 1 3 + ? output pulse generator led (see note a) t f 90% 10% notes: a. the input irradiance is supplied by a pulsed gaas light-emitting diode with the following characteristics: p = 940 nm, t r < 1 s, t f < 1 s. b. the output waveform is monitored on an oscilloscope with the following characteristics: t r < 100 ns, z i 1 m , c i 20 pf. figure 1. switching times typical characteristics 0.4 0 normalized output voltage 1 0.8 0.6 0.2 ? angular displacement tsl260r 80 60 40 20 0 80 60 40 20 optical axis normalized output voltage vs angular displacement v ? o figure 2 TSL262R tsl261r ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 5 the lumenology company copyright 2007, taos inc. www.taosinc.com typical characteristics output voltage vs irradiance figure 3 0.1 1 10 100 1000 v dd = 5 v p = 940 nm r l = 10 k t a = 25 c v o ? output voltage ? v e e ? irradiance ? w/cm 2 0.01 0.1 1 10 tsl260r tsl261r TSL262R figure 4 photodiode spectral responsivity ? wavelength ? nm 700 800 900 1000 1100 600 0 0.2 0.4 0.6 0.8 1 relative responsivity t a = 25 c figure 5 4 2 1 0 5.5 2.5 3 3.5 5 maximum output voltage vs supply voltage 4 4.5 5 ? maximum output voltage ? v v om 3 v dd ? supply voltage ? v r l = 10 k t a = 25 c figure 6 1 0.6 012 3 1.6 4 1.4 1.2 0.8 v o ? output voltage ? v ? supply current ? ma i dd supply current vs output voltage v dd = 5 v r l = 10 k t a = 25 c ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 6 copyright 2007, taos inc. the lumenology company www.taosinc.com application information note a: pullup resistor extends linear output range to near v dd with minimal (several millivolts typical) ef fect on v dark ; particularly useful at low v dd (3 v to 5 v). tsl26xr sensor output r p = 100 k v dd 2 3 1 figure 7. pullup for increased v om ? optek part number tsl261r sensor output 50-k threshold 5 v 2 3 1 + ? 100 op240 ? 5 v 4 5 v 4.7 k 10 k 15 k lm393 1 8 3 2 15 k note a: output goes high when beam is interrupted; working distance is several inches or less. intended for use as optical-interrupter switch or reflective-object sensor. figure 8. short-range optical switch with hysteresis ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 7 the lumenology company copyright 2007, taos inc. www.taosinc.com application information note a: output pulses low until beam is interrupted. useful range is 1 ft to 20 ft; can be extended with lenses. this configurat ion is suited for object detection, safety guards, security systems, and automatic doors. ? stanley part number TSL262R sensor output 50 k 5 v 2 3 1 + ? bn301 ? 4 5 v 4.7 k 15-k tlc372 1 8 3 2 100 k 5 v 0.01 f threshold tlc555 4 3 1 5 v 8 27 k 7 6 2 3 k 0.01 f 2n3906 18 figure 9. pulsed optical-beam interrupter note a: output goes low when light pulses from emitter are reflected back to sensor. range is 6 in to 18 in depending upon objec t reflectance. useful for automatic doors, annunciators, object avoidance in robotics, automatic faucets, and security systems. ? optek part number ? stanley part number op295 ? or bn301 ? 560 k tsl260r sensor 6 v 2 3 1 0.1 f ne567 4 1 k 270 k 0.1 f 4.7 f 1 f 0.1 f 10 k 100 + + 3 27 1 8 light shield 2n3904 0.01 f 5 6 figure 10. proximity detector ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 8 copyright 2007, taos inc. the lumenology company www.taosinc.com application information note a: single-channel remote control can be used to switch logic or light dc loads by way of u5 or ac loads by way of the optocoupler and triac as shown. applications include ceiling fans, lamps, electric heaters, etc. ? optek part number d1 bn301 ? 9 v 3 1 c1 1 f + q1 2n3904 3 1 2 r2 1 k r3 22 r1 680 5 7 6 2 84 transmitter u1 tlc555 s1 15 13 3 1 16 4 c3 1 f + + 7 1 c2 0.1 f 2 3 in out com 6 v r4 180 ac load j1 2 3 1 6 4 1 2 r8 300 r7 4.7 k 8 1 6 2 5 3 4 6 v 6 v c5 0.1 f r5 7.5 k r6 4.7 k c4 4.7 f 6 v 1 2 3 120 v 60 hz pre v cc clr j clk k gnd q r9 1 k q3 2n3904 52 til3010 u3 u2 ne567 u4 tsl260r sensor u5 1/2 sn74hc76 to sensor q2 tic225c receiver freq trim figure 11. ir remote control ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 9 the lumenology company copyright 2007, taos inc. www.taosinc.com application information note a: simple transmission of audio signal over short distances (<10 ft). applications include wireless headphones, wireless-te lephone headset, and wireless-headset intercom. ? optek part number in out com 6 v u2 tle2426 c1 1 f + r2 20 k _ + d1 op295 ? d2 op295 ? r3 40 q1 2n3904 r1 10 k audio input 6 v 6 v in out com 9 v u2 tle2426 _ + 9 v c2 47 f r1 100 k c1 100 pf r2 10 k in out com 9 v u1 tsl261r sensor c3 1 f 3 2 6 7 4 1 3 2 u3a ne5534 u1 tlc271 2 3 7 5 4 8 1 6 transmitter receiver + + vol output (to headphones) figure 12. ir voice-band audio link ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 10 copyright 2007, taos inc. the lumenology company www.taosinc.com application information pcb pad layout suggested pcb pad layout guidelines for the sm surface mount package are shown in figure 16. 3.2 1.0 1.0 1.0 1.0 1.0 notes: a. all linear dimensions are in millimeters. b. this drawing is subject to change without notice. figure 13. suggested sm package pcb layout ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 11 the lumenology company copyright 2007, taos inc. www.taosinc.com mechanical data the tsl260r, tsl261r, and TSL262R are supplied in a clear 3-lead through-hole package with a molded lens. the integrated photodiode active area is typically 1,0 mm 2 (0.0016 in 2 ) for tsl260r, 0,5 mm 2 (0.00078 in 2 ) for the tsl261r, and 0,26 mm 2 (0.0004 in 2 ) for the TSL262R. package s plastic single-in-line side-looker package 1.64 2.60 2.30 4.60 r 0.90 1.80 0.42 1 2 2 0.47 typ top view front view side view 0.42 1.56 14.86 0.50 4.60 0.15 note b lead free available pb notes: a. all linear dimensions are in millimeters; tolerance is 0.25 mm unless otherwise stated. b. dimension is to center of lens arc, which is located below the package face. c. the integrated photodiode active area is typically located in the center of the lens and 0.97 mm below the top of the lens su rface. d. index of refraction of clear plastic is 1.55. e. lead finish for tsl26xr: solder dipped, 63% sn/37% pb. lead finish for tsl26xr ? lf: solder dipped, 100% sn. f. this drawing is subject to change without notice. figure 14. package s ? single-in-line side-looker package configuration ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 12 copyright 2007, taos inc. the lumenology company www.taosinc.com mechanical data package sm plastic surface mount side-looker package 1.64 2.60 2.30 4.60 r 0.90 1.80 0.42 1.00 0.47 typ top view side view front view 0.42 5.73 0.50 4.60 0.15 note b 2.59 0.62 0.10 1.97 0.62 +0.10 ? 0.15 lead free pb 2 2 notes: a. all linear dimensions are in millimeters; tolerance is 0.25 mm unless otherwise stated. b. dimension is to center of lens arc, which is located below the package face. c. the integrated photodiode active area is typically located in the center of the lens and 0.97 mm below the top of the lens su rface. d. index of refraction of clear plastic is 1.55. e. lead finish for tsl26xrsm ? lf: solder dipped, 100% sn. f. this drawing is subject to change without notice. figure 15. package sm ? surface mount side-looker package configuration ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 13 the lumenology company copyright 2007, taos inc. www.taosinc.com production data ? information in this document is current at publication date. products conform to specifications in accordance with the terms of texas advanced optoelectronic solutions, inc. standard warranty. production processing does not necessarily include testing of all parameters. lead-free (pb-free) and green statement pb-free (rohs) taos? terms lead-free or pb-free mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, taos pb-free products are suitable for use in specified lead-free processes. green (rohs & no sb/br) taos defines green to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material). important information and disclaimer the information provided in this statement represents taos? knowledge and belief as of the date that it is provided. taos bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. taos has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. taos and taos suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. notice texas advanced optoelectronic solutions, inc. (t aos) reserves the right to make changes to the products contained in this document to improve performance or for any other purpose, or to discontinue them without notice. customers are advised to contact taos to obtain the latest product information before placing orders or designing taos products into systems. taos assumes no responsibility for the use of any products or circuits described in this document or customer product design, conveys no license, either expressed or implied, under any patent or other right, and makes no representation that the circuits are free of patent infringement. taos further makes no claim as to the suitability of its products for any particu lar purpose, nor does taos assume any liability arising out of the use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. texas advanced optoelectronic solutions, inc. products are not designed or intended for use in critical applications in which the failure or malfunction of the taos product may result in personal injury or death. use of taos products in life support systems is expressly unauthorized and any such use by a customer is completely at the customer?s risk. lumenology, taos, the taos logo, and texas advanced optoelectronic solutions are registered trademarks of texas advanced optoelectronic solutions incorporated. ams ag technical content still valid
tsl260r, tsl261r, TSL262R infrared light-to-voltage optical sensors taos049e ? september 2007 14 copyright 2007, taos inc. the lumenology company www.taosinc.com ams ag technical content still valid

▲Up To Search▲

Price & Availability of TSL262R

	To Download TSL262R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .